Clay Paky HandsOn - Manual (Page 21)

Handson Manual
8 S
TACKLISTS
Stacks can be used to combine multiple cuelists into one efect. You could use it on-the-fy to start
multiple cuelists in sync, or you can program a stacklist and assign it to a playback.
8.1 U
SING STACKS LIVE
To trigger multiple playbacks at the same time during live operating, press the STACK button and click
on the PLAY buttons of the playbacks you want to trigger at the same time. As soon as you press STACK
again, the selected playbacks will trigger simultaneously.
8.2 R
ECORDING STACKLISTS
If you want to repeatedly trigger the same playbacks, recording to a stack in a stacklist comes in handy.
Press the STACK button. Click on the PLAY buttons of the playbacks you want to trigger at the same
time and press RECORD. Now click on the PLAY button of an empty playback fader or button. A new
stacklist will be created containing the new stack. You can record multiple stacks on the same playback
fader or button.
8.3 E
DIT A STACKLIST
To edit a stacklist, go to the Stack
menu or double-click on the Playback
Indicator above the playback button
or playback fader where the stacklist
is recorded.
The Stacklist has several properties you can change.
Loop
This check box controls whether the stacklist will release after running the last stack or whether it will
go back to the frst stack and keep looping until it is released manually.
Label
You can give each stack a label for your own reference.
Condition
Similar to making cues, you can set conditions for each stack. Although for stacks only 'Halt' and
'Follow' are supported.
Delay
A delay time can be set between triggering the stack and when the cuelists will become active.
p 20