Clay Paky HandsOn - Manual (Page 13)

Handson Manual
Alternatively, you can double-click on the 'indicator' just above a playback to bring up the Playback
Settings view. Pressing the ASSIGN button in this dialog will bring up the assignment dialog.
Finally, you can also assign by creating a new cuelist, stacklist or group in main view, this implicitly
assigns the new cuelist, stacklist or group to a playback. Please refer to the Cuelist, Stacklist or Group
chapter for an explanation on how this is done.
Indicator
The small rectangle above the playbacks are called 'indicators', they provide some basic feedback on
the contents of the playback.
Background
If a playback is set to 'background' then it will start running automatically at the software's startup.
Also, it will not be released by the 'release all' command (a 'release all' is performed when the RELEASE
button is pressed for over one second).
The background feature is useful for cuelists controlling fxtures that should not be turned of during a
show, e.g. 'work' lights backstage.
Fader Start
With Fader start enabled, the playback will automatically be triggered when the corresponding fader is
being moved up or the fash button is pressed. The playback will also be released as soon as the fader is
back at the bottom or when the fash button is released.
p 12
Intensity level
At Cue 1 out of 5
Cuelist's name
Speed level
Attack level
Green = running