Bird Technologies 8630B Series - Manual (Page 11)

ix
Naming Conventions
The following terms will be used throughout this manual to refer to certain
components of the Moduload:
Moduload: The entire unit.
Load: The component which connects to the RF line. It is connected to the HEAT
EXCHANGER with two hoses. It contains the RESISTOR.
Heat Exchanger: The component containing the pump, blower, coolant
reservoir, control panel, and electrical access box. It is connected to the LOAD
with two hoses.
Resistor: A subcomponent of the LOAD. This is the ceramic resistor which
actually absorbs the RF power.