Bird Technologies SCC7 Series-Manual - Manual (Page 4)

ii

Note:
Calls attention to supplemental information.
Warning Statements
The following safety warnings appear in the text where there is danger to operating and mainte‐
nance personnel, and are repeated here for emphasis.
On pages 2 and 7.
On pages 5.
On pages 5.
On pages 5, 11, and 16.
On pages 11.
On pages 11, 14, and 16.
This symbol indicates that a shock hazard exists if the precautions in the
instruction manual are not followed.
The caution symbol appears on the equipment indicating there is import‐
ant information in the instruction manual regarding that particular area.
This symbol indicates that the unit radiates heat and should not be touched
while hot.
WARNING
Refer to the supplied load manual for load‐specific warnings and cautions.
WARNING
All vent plugs must be installed on the load at all times when the unit is operating or
cooling. Failure to do so could result in an explosion or severe burns.
WARNING
Do not attempt to lift the cart by the handle.
WARNING
Never attempt to connect or disconnect RF equipment from the transmission line while RF
power is being applied. Leaking RF energy is a potential health hazard.
WARNING
The Bird 4421 contains no user‐serviceable parts.
Do not remove its cover.
WARNING
To avoid personal injury, disconnect the power cord from the AC line before performing
any maintenance, including fuse replacement.