Bird Technologies AT-500-Manual - Manual (Page 49)

Measure Match
31
Selecting Limit Values
Valid limit values depend on measurement units
selected. Valid entries are:
VSWR
Between 1.0 and 100.0
% Match
Between 0 and 100%
Return Loss
Between -32 and 0 dB
RHO
Between 0.000 and 1.000
1. Press the MENU key.
2. Press the SWEPT FREQ key.
3. Press the LIMIT key.
4. Press the VALUE key. The cursor will blink next
to off.
5. Enter the desired value using the numeric key-
pad or change the value using the UP/DOWN
arrow keys.
6. Press the ENTER key.
Note:
Pass or Fail will be displayed, a tone
will be heard for fail if audio is enabled.