Start stop mhz center mhz – Bird Technologies AT-500-Manual User Manual

Page 42

Bird AT-500 Antenna Tester

Start Stop MHz

Note:

The cursor will blink on the start fre-

quency and Start Stop MHz will be highlighted.

1. Enter the frequency using the numeric keypad or

change the frequency using the UP/DOWN arrow keys.

2. Press the ENTER key. The cursor will blink on the

stop frequency.

3. Enter the frequency using the numeric keypad or

change the frequency using the UP/DOWN arrow keys.

4. Press the ENTER key. The tester will begin sweeping.

Center MHz

Note:

The cursor will blink on the Center

frequency and Center MHz will be highlighted.

1. Enter the frequency using the numeric keypad or

change the frequency using the UP/DOWN arrow keys.

2. Press the ENTER key.

Note:

The tester will begin sweeping.

3. Press the SPAN key.

4. Enter the frequency using the numeric keypad or

change the frequency using the UP/DOWN arrow keys.

5. Press the ENTER key.

Note:

The tester will begin sweeping.