Autocue SSP07 Quick Start - Manual (Page 23)

Use your prompter in different situations
SSP07-QStartUserManual.docx 2010-10-01
4.
Remove the hood mounting
carry case.
5.
Remove the two thumbscrews attaching the monitor mounting bracket to the drop
bracket.
6.
Remove the two thumbscrews securing the monitor to the monitor mounting bracket.
7.
Align one of the screw holes on the back of the monitor with the hole in the centre
of the drop bracket and use one of the thumbscrews to attach the monitor to the
drop plate.
Note: Ensure you have the correct orientation: t
the monitor when you read text on the screen
Portable straight-read (Monitor below the camera with
1.
Place your SSP07 on a smooth, level
2.
Remove the thumbscrews holding the hood
23
mounting bracket completely and carefully place it in the SSP07
the two thumbscrews attaching the monitor mounting bracket to the drop
thumbscrews securing the monitor to the monitor mounting bracket.
screw holes on the back of the monitor with the hole in the centre
of the drop bracket and use one of the thumbscrews to attach the monitor to the
Ensure you have the correct orientation: the control buttons shou ld be to the right of
hen you read text on the screen.
Monitor below the camera with no mirror)
smooth, level surface.
Remove the thumbscrews holding the hood and monitor assemblies in position.
© 2003-2010 Autocue Group Ltd.
bracket completely and carefully place it in the SSP07
the two thumbscrews attaching the monitor mounting bracket to the drop
thumbscrews securing the monitor to the monitor mounting bracket.
screw holes on the back of the monitor with the hole in the centre
of the drop bracket and use one of the thumbscrews to attach the monitor to the
ld be to the right of
)
in position.