AJA KUMO CP User Manual
Page 30

KUMO v3.1
www.aja.com
30
NOTE:
The default static address is temporary and will be disabled the next time KUMO restarts. Any
changes in the Network configuration will be saved upon restart.
1. Set the KUMO to its factory default IP address. See
“KUMO Temporary Static IP Address”
2. Configure your computer to talk on the 192.168.101.X subnet as shown below (this
example is for a PC connected directly to KUMO):
IMPORTANT:
First record existing TCP-IP settings so that you can return your computer to normal
operation after this procedure.
A. Use Control Panel to access your Local Area Network properties. In Windows XP
the path is:
• Start > Control Panel > Network and Internet Connections > Network Connections
B. Then, under “Network Connections” locate and click on the Local Area Connection
for the PC’s Ethernet port.
Figure 23. Windows Network Configuration Screen
C. In the resulting General dialog screen, select the Properties button.
D. Then on the Local Area Connection Properties dialog, select the Internet Protocol
item and click the Properties button below it.