Rockwell Automation LX-Series Iron Core Linear Servo Motors - Manual (Page 45)

Rockwell Automation Publication LX-UM001A-EN-P - March 2011 45
Configure and Start Up the LX-Series Linear Motor Chapter 6
• Ultra3000 drives without SERCOS
–
Firmware revision 1.52 or later
– Ultraware Software, version 1.63 or later
– Motor Database, motor_LX xxx.mdb
Call Anorad Tech Support 631-344-6600 to obtain the latest files.
Follow These Steps The following flow chart illustrates the required steps.
Update the Linear Motor
Database
Install the current Motion Database, as required, before commissioning your
linear motor. See the Required Files on page 44 .
Update the Linear
Motor Database
Verify Motor Encoder
Resolution
Set Up the Connection to a
Kinetix 6000, Kinetix 6500/
6200, or Kinetix 2000 Drive
Verify Motor Encoder
Direction
Verify Linear Motor
Wiring and Function
Set Up the Connection to an
Ultra3000 Drive
Drive Model?
Ultra3000 Drive
without SERCOS
Kinetix 6000 Drive,
Kinetix 6200/6500 Drive,
Kinetix 2000 Drive, or
Ultra3000 with SERCOS
page 54
page 54
page 53
page 51 page 46
page 45