Rockwell Automation Drives and Motion Accelerator Toolkit Quick Start Summary - Manual (Page 5)

Rockwell Automation Publication IASIMP-QS022B-EN-P - April 2012
Drives and Motion Accelerator Toolkit Quick Start Summary 5
Ch. 1 Example - Run the DMAT Wizard
Follow these steps to launch the DMAT Wizard and set up your wizard configuration.
1. Navigate to and select the
DMAT Wizard .exe file on the
Drives and Motion Accelerator
Toolkit DVD image.
The DMAT Wizard opens and a dialog box opens, explaining the general scope of the wizard.
2. Read the dialog box and click OK to continue wizard configuration.
The Open or Create a Project dialog box opens.
3. Click Create New to initiate a new project.
Another configuration information dialog box
opens, explaining machine, application, and drive
configuration.
4. Read configuration information dialog box and
click OK to continue.