Rockwell Automation Drives and Motion Accelerator Toolkit Quick Start Summary - Manual (Page 3)

Rockwell Automation Publication IASIMP-QS022B-EN-P - April 2012
Drives and Motion Accelerator Toolkit Quick Start Summary 3
Chapter 5 - FactoryTalk View ME
Configuration
In this chapter you create the operator interface
application file for your system using FactoryTalk
View Studio software. The toolkit includes a
variety of preconfigured machine and device
faceplate displays providing status, control, and
diagnostics for your drives and motion system.
Chapter 6 - System Commissioning
In this chapter you download your Logix and
PanelView™ Plus applications, prepare and tune
your drive hardware, verify network
communications, and verify general operator/
program control.
Chapter 7 - System Application Guide
This chapter guides you through the pre-
configured FactoryTalk View Machine Edition
application faceplates providing you with an
understanding of the status, control, and diagnostic
operation of the faceplate displays.
Chapter 7
Motion System Application Guide
Servo Drive
755 0 0 3 0 0
RESETTING
IDLE
(enabled)
START
RUNNING
STOPPING
STOP
STOPPED
(disabled)
CLEARING ABORTED
ABORTING RESET
ABORT
CLEAR
The machine can go from any state in the shaded box to STOPPING.
The machine can go from any state
in the solid box to ABORTING.
STARTING
Chapter 7
System Application Guide
Chapter 5
FactoryTalk View ME Configuration
Chapter 6
System
Commissioning
Assembly
Packaging