Rockwell Automation 1766-L32 Pump Station Controller Quick Start - Manual (Page 41)

Publication IASIMP-QS037A-EN-P - May 2013 39
Chapter 1
6. From the Source list select Internal.
7. Once the source is set to Internal, push Set As Startup.
The application name displays under Startup Application.
8. Push Run to launch the application.
Security
The Panelview has three levels of security: User, Supervisor, and Admin.
– User has access to all screens except: “Secure Screen”, “Analog
Inputs Config”, “Analog Outputs Config”, “Pump Interlocks”, “PID
Tuning”, “Application Config”, “Process Config”, “Level/Pressure
Set points”, “Backup Pump Selection”, “Alarm Output Config” and
“Power Flex Parameters”.
– Supervisor has access to all screens except the “Application Config”
screen.
– Admin has access to all screens.
The default user names and passwords are as follows:
Because some screens are only accessed from previous screens, access may be
limited to more than the screens listed above. For example, the “Measuring
Setup” screen is only accessible through the “Application Setup” screen.
Therefore if you do not have access to the Application Setup” screen, you do
not have access to the “Measuring Setup” screen.
Account User Name Password
User user [none]
Supervisor supervisor supervisor
Admin admin admin