Rockwell Automation 1766-L32 Pump Station Controller Quick Start - Manual (Page 34)

32 Publication IASIMP-QS037A-EN-P - May 2013
Chapter 1
Alarm Output Configuration
From the Alarm Output Configuration screen you can:
– Press UP/DOWN to select a process-specific alarm from the list
– Press Add Alarm or Remove Alarm to enable or disable the
selected process-specific alarm
The alarms, when enabled, combine to turn on PLC output O:0/9. If
the alarm is not enabled, even though it becomes active, it will not
turn the PLC output on.
– Press MORE to add pump-specific alarms from the Pump # Alarm
Output Configuration screen(s). Refer to Pump #1 Alarm Output
Configuration on page 32.
Pump #1 Alarm Output Configuration
Refer to Alarm Output Configuration on page 32 for screen descriptions and
functions. Add and/or remove alarms for the selected pump. Press MORE to