Before you begin – Rockwell Automation RDD-B4102 Rotary Direct Drive Bearingless Motors User Manual
Page 4
4 RDD-Series Rotary Direct Drive Bearingless Motor Installation Instructions
Publication RDB-IN002B-EN-P — February 2010
Before You Begin
Remove all packing material, wedges, and braces from within and around the item.
After unpacking, verify the nameplate catalog number against the purchase order.
1. Remove the motor carefully from its shipping container.
2. Visually inspect the motor frame, mounting pilot, and connectors for
damage.
3. Notify the carrier of any shipping damage immediately.
4. Retain the cardboard cover and protective paper sleeving from the mounting
end of the motor.
ATTENTION
Magnetized material within the motor is exposed whenever the protective cover is
removed and before the motor is mounted.
Accidental entry of foreign material can harm motor performance.
Always cover the mounting end of motor immediately after removing the motor or its
protective cover. This will greatly reduce the possibility of magnetic or non-magnetic
particles accidentally entering the motor.