Rockwell Automation RDD-B4102 Rotary Direct Drive Bearingless Motors - Manual (Page 14)

14 RDD-Series Rotary Direct Drive Bearingless Motor Installation Instructions
Publication RDB-IN002B-EN-P — February 2010
Remove the End Cover
Loosen each pan head screw with a Phillips screwdriver.
• The RDB- x 290 x motor (shown) has eight (8) screws to loosen.
• The RDB- x 410 x motor has eleven (11) screws to loosen.
IMPORTANT
Do not attempt to remove the pan head screws from the cover. The screws are
attached to the end cover with a mechanical lock-ring.
Foam Holder for Shipping Hardware
End Cover