Rockwell Automation RDD-B4102 Rotary Direct Drive Bearingless Motors - Manual (Page 26)

26 RDD-Series Rotary Direct Drive Bearingless Motor Installation Instructions
Publication RDB-IN002B-EN-P — February 2010
Cover the Mounting End of the Motor
Seal the opening in the motor end by performing the following steps.
1. Insert the protective paper sleeving around the rotor.
2. Cover the opening at the mounting end of the motor with the cardboard
cover that came with the motor.
ATTENTION
The motor contains strong magnets that can attract metallic materials.
Accidental entry of foreign material can harm motor performance.
Always cover the mounting end of motor immediately after removing the motor. This
prevents foreign material from accidentally entering the motor.