Controller and other component quick starts, Use each chapter – Rockwell Automation Logix5000 Control Systems: Connect PowerFlex 70 Drives over EtherNet/IP Quick Start User Manual
Page 8
8
Rockwell Automation Publication IASIMP-QS031A-EN-P - February 2012
Preface
Controller and Other Component Quick Starts
This quick start describes how to use one device on one network in a Logix5000 control system.
Typically, though, a Logix5000 control system includes more than the controller and one device
on one network.
For example, if a Logix5000 control system operates on an EtherNet/IP network, in addition to
a controller, power supply, and communication modules, the system might use remote I/O
modules, drives and HMI terminals.
Other quick starts describe how to use different devices on different networks in Logix5000
control systems. For more information, see the Integrated Architecture: Logix5000 Control
Systems Quick Starts Quick Reference, publication
.
Use Each Chapter
The beginning of each chapter contains the following information. You should read these
sections before beginning work in each chapter:
•
Before You Begin
- This section lists the tasks you must complete before starting
the chapter.
•
What You Need
- This section lists the tools that are required to complete the tasks in
the chapter.
•
Follow These Steps
- This section illustrates the steps in the current chapter.