Rockwell Automation Logix5000 Control Systems: Connect PowerFlex 70 Drives over EtherNet/IP Quick Start - Manual (Page 26)

26 Rockwell Automation Publication IASIMP-QS031A-EN-P - February 2012
Chapter 2 Add a PowerFlex 70 Drive to an RSLogix 5000 Project
13. Click the Connection tab.
14. Clear Use Unicast Connection
over EtherNet/IP and click OK.
15. Click Close on the Select Module
Type dialog box.
The PowerFlex 70 is added to the
controller organizer under the
network port.
16. Save the project.