Rockwell Automation T8062 ICS Regent+Plus High Integrity Power Supply Assembly - Manual (Page 2)

I/O Power Supply Assembly (T8060,T8062)
2
Industrial Control Services
Structure
The power supply assembly consists of a power supply chassis containing
up to six power supply modules. The chassis may be configured to
distribute power in various combinations. For example, a chassis containing
six power supply modules may be set up with three modules providing
triplicated power for Regent+Plus I/O assemblies and three modules
providing field power in a N+1 configuration.
Power Supply Chassis
The power supply chassis houses a maximum of six power supply modules.
It may be mounted in a 19-inch rack or flush mounted on a panel. Table 1
identifies the available types of chassis.
Table 1. Chassis Types
Catalog No. Chassis Unit Input Power Voltage Configuratio
n
T8200 I/O Power Supply Chassis 110-240 VAC, 50/60 Hz Straight Bussed
T8201 I/O Power Supply Chassis 110-240 VAC, 50/60 Hz Cross Bussed
T8202 I/O Power Supply Chassis 24 VDC
Power Supply Modules
The power supply assembly modules are single (if redundant inputs are not
required) and dual input, hot swap, user-replaceable AC and DC units.
Table 2 identifies the available types of modules.
Table 2. Module Types
Catalog
No.
Input
Type
Input Power
Voltage
Output Power
Voltage
T8220 Dual 110-240 VAC 15 VDC
T8222 Dual 24 VDC 15 VDC
T8223 Single 110-240 VAC 24 VDC
T8224 Single 110-240 VAC 15 VDC
T8225 Dual 110-240 VAC 24 VDC
T8226 Dual 24 VDC 24 VDC