Rockwell Automation 8520-OM Offline Development System Software - Manual (Page 36)

Chapter
4
Publication MCD-5.1 -August 1999
Configuring ODS
This chapter tells you how to use the five functions available under
the F5-Configuration menu. These functions include how to:
•
specify the text editor
•
use the keyboard setup
•
configure your serial communication device
•
configure your print device (Windows NT
t only)
•
turn the beeper option On and Off
•
turn the verify option On and Off
•
execute DOS commands when you are in ODS
If you want to: See page:
specify the text editor 4-1
use the keyboard setup 4-2
configure your serial communication device 4-3
configure your print device 4-4
turn the beeper ON/OFF 4-4
turn the verify feature ON/OFF 4-5
execute DOS commands from within ODS 4-6
know what to do next 4-6
Some applications and utilities require the use of a text editor that
you must install. To use this text editor in ODS, specify the path and
file name with the F5-Configuration menu. This lets ODS activate
the text editor option.
Important: You must supply the text editor and install it on the
computer’s hard disk.
1. To access the text editor setup, pull down the F5-Configuration
menu.
2. Select the Text editor setup option.
ODS asks for the DOS path and file name of the text editor.
Chapter Objective
Specifying the Text Editor