Rockwell Automation 1797-IRT8 FLEX Ex Thermocouple/RTD/mV Input Module User Manual - Manual (Page 54)

Publication 1797-6.5.2 - February 2001
5-2 Calibrating Your Module
Tools and Equipment To calibrate your analog I/O modules, you will need the following
tools and equipment:
Calibration Method Calibration is done through the I/O Configuration Software which is
part of your programming software package, such as RSLogix 5.
Select the Calibration tab in the software and follow the instructions
for complete module calibration..
Tool or Equipment: Description:
Precision Resistors High precision resistors:
383W, 0.01%, 5ppm/
o
C
100W, 0.01%, 5ppm/
o
C
10kW, 0.5%, 5ppm/ o C
Precision Voltage Source +320mV, 1mV resolution
PC and Interconnect Cable Programming terminal for A-B family processors