Rockwell Automation 5370-OCR2 PAK - Manual (Page 22)

Chapter 4
OCR Tool Configuration
4–3
There are two ways to add tools to the Toolset:
•
one way creates a new tool
•
the other copies an existing tool which is modified
To create a new tool:
1. Choose either Add
" or Add # button on the Toolset panel to add a tool
above or below the currently selected [
!] tool.
The following panel appears with tool type selections.
2. From the list, select OCR. Click the Done button.
An OCR Tool is added to the list in the Toolset panel.
3. To edit tools, refer to next section Editing OCR Tools.
To copy an existing tool:
1. Select the OCR Tool to be copied by clicking the number using the
mouse. The selected tool is indicated by an arrow[
!].
2. Choose the Copy button and then the Paste
" or Paste# button to place
the copy OCR Tool before or after the the marked [
!] tool.
3. The copied OCR Tool has the same attributes as the original tool.
4. To edit tools, refer to next section Editing an OCR Tool.