Rockwell Automation 2097-PGMR Memory Module Programmer Quick Start - Manual (Page 3)

Bulletin 2097 Memory Module Programmer 3
Publication 2097-QS001D-EN-P - November 2011
Before You Begin
Before programming your 2097-MEM module by using the 2097-PGMR memory module
programmer, read this quick start carefully and follow all the instructions.
Hardware Requirements
This documentation applies to the memory module programmer version 1A 10. The
identification label is on the back of the memory module programmer.
Parts List
The following items come with the memory module programmer.
Inspect the memory module programmer and verify that it is damage free. Any damage or
suspected damage should be immediately documented. Claims for damage due to shipment are
usually made against the transportation company. Contact Rockwell Automation for further
advice:
• Compare the purchase order with the packing slip.
• Check that the quantity of memory modules received matches your job requirements.
Memory modules are ordered separately.
Item Description Value
1 Catalog number 2097-PGMR
2 Hardware revision 1A
3 Software version 10
Quantity Cat. No. Publication No. Description
1 2097-PRGM — Memory module programmer with 4 batteries installed.
1 — 2097-QS001 Memory module programmer quick start.
CAT. NO. 2097-PGMR
For detailed information
refer to instruction
manual
HW/SW REV:1A 10
SN: 2097-PGMR012345678 Product of USA
EPM Programmer
LISTED
IND.CONT EQ
5D81
N10104
Z519
6V DC 150 mA min
Power Supply
(FRIWO 7207/06 1.0791 MPP15)
1 2 3