Rockwell Automation 6186-Mxxx Industrial Monitors User Manual - Manual (Page 37)

Publication 6186M-UM001J-EN-P - July 2008 37
Configure the Video Setup Chapter 3
OSD Menus You can modify the settings to the monitors by using the following
menus.
•
Main
•
Input
•
Brightness, Contrast, and Sharpness
•
Color
•
Display Adjust
•
Tools
Main Menu
Main Menu
Input Menu
Brightness-Contrast Color Tools
Exit
Submenu Icons
Main Menu Icons
Slidebar Area for
adjusting settings
Exit
Display-Adjust
Icon Function
Brightness-Contrast-
Sharpness Accesses functions to adjust the brightness, contrast, and
sharpness.
Color Accesses functions to select standard RGB levels, or manually
adjust RGB levels, or set the color temperature.
Display Adjust Accesses functions to auto-adjust the display settings or manually
adjust the horizontal and vertical image position, frequency phase
and width level.
Tools Accesses functions to adjust the OSD, reset factory settings, reset
factory color settings, reset position, and adjust sharpness.
Input Menu Accesses options for selecting analog or digital picture input. The
input selection depends on the signal from the computer and the
type of cable connected to the monitor.
Exit Exits the OSD main menu.