Rockwell Automation 2711PC-xxxx PanelView Plus Compact User Manual - Manual (Page 93)

Publication 2711PC-UM001A-EN-P - March 2009 93
Terminal Connections Chapter 6
Ethernet Connections The Ethernet port on the PanelView terminals supports:
•
EtherNet/IP communication.
•
third-party Ethernet communication.
•
network connections.
•
application uploads/downloads.
•
printing.
Ethernet Connector
The terminals have an RJ45, 10/100 Base-T connector for EtherNet/IP
or Ethernet TCP/IP network communication.
The table shows the connector pinouts.
Ethernet Connector Pinout
Use point-to-point, 10/100 Base-T cables with cross over pin-outs,
such as catalog number 2711P-CBL-EX04, when connecting the
Ethernet port on the terminal directly to:
•
Ethernet port on the controller.
•
10/100 Base-T port on a computer without a switch.
Ethernet Port
Insert plastic tie wrap in
hole and use as strain relief
for all attached cables.
Pin Pin Pin Name
Looking into RJ45
Connector
1 TD+
2 TD-
3 RD+
4 NC
5 NC
6 RD-
7 NC
8 NC
Shield Connection No Direct Connection
(AC coupled to Chassis GND)
1 8