6 - terminal connections, Chapter objectives, Cables for runtime communication – Rockwell Automation 2711PC-xxxx PanelView Plus Compact User Manual User Manual
Page 87: Chapter 6, Terminal connections, Chapter
87
Publication 2711PC-UM001A-EN-P - March 2009
87
Chapter
6
Terminal Connections
Chapter Objectives
This chapter provides network and device connections for the
terminals.
•
Runtime communication cables
•
Communication port isolation
•
USB ports
•
Serial connections on base unit
•
Ethernet (onboard communication)
Cables for Runtime
Communication
The tables provide a summary of terminal connections to controllers
and network interface modules for runtime communication.
PanelView Plus Compact Terminals to MicroLogix Controllers
PanelView Plus Compact Terminals to SLC Controllers
Cables: PanelView Plus Compact Terminals to SLC Controllers
Protocol
PanelView Plus Compact
400, 600, 1000 Comm Port
SLC-500, 5/01, 5/02
CH1 RJ45
(DH-485)
SLC-5/03, 5/04, 5/05
CH0 (9-pin RS-232)
(DF1 or DH-485)
SLC 5/03
CH1 (RJ45)
(DH-485)
SLC 5/04
CH1 (DH+)
SLC 5/05
CH1 (ENET)
DF1
RS-232 (DF1) Comm port (9-pin)
N/A
2711-NC13 (5 m/16 ft)
2711-NC14 (10 m/32 ft)
2706-NC13 (3 m/10 ft)
N/A
N/A
N/A
DH-485
RS-232 (DH-485) Comm port (9-pin)
Use AIC+ module
(1761-NET-AIC)
Connect to port 1 or 2
2711-NC13 (5 m/16 ft)
2711-NC14 (10 m/32 ft)
2706-NC13 (3 m/10 ft)
Use AIC+ module
(1761-NET-AIC)
Connect to port 1 or 2
N/A
N/A
EtherNet/IP
EtherNet/IP Comm port
N/A
Use 1761-NET-ENI module
with Ethernet cable
N/A
N/A
2711P- CBL-EX04 Ethernet
crossover cable
(1)
(1)
An EtherNet/IP direction connection between a PanelView Plus Compact terminal and an SLC 5/05 requires hub or crossover cable listed.
Cables: PanelView Plus Compact to MicroLogix Controllers
Protocol
PanelView Plus Compact
400, 600, 1000 Comm Port
MicroLogix 1500LRP
CH1 (9-pin RS-232)
(DF1 or DH-485)
MicroLogix 1000, 1200, 1500LSP
CH0 (8-pin Mini DIN)
(DF1 or DH-485)
MicroLogix 1100, 1400
Ethernet Port
DF1
RS-232 (DF1) Comm port (9-pin)
2711-NC13 (5 m/16 ft)
2711-NC14 (10 m/32 ft)
2706-NC13 (3 m/10 ft)
2711-NC21 (5 m/16 ft)
2711-NC22 (15 m/49 ft)
(null modem not required)
(1)
N/A
DH-485
RS-232 (DH-485) Comm port (9-pin)
2711-NC13 (5 m/16 ft)
2711-NC14 (10 m/32 ft)
2706-NC13 (3 m/10 ft)
2711-NC21 (5 m/16 ft)
2711-NC22 (15 m/49 ft)
N/A
EtherNet/IP
EtherNet/IP Comm port
Use 1761-NET-ENI module
with Ethernet cable
Ethernet cable
(1)
AIC+ Module recommended for isolation when PanelView and controller are not using same power supply.