Modifying regional settings, Select a language, Change the decimal separator for numeric formats – Rockwell Automation 2711PC-xxxx PanelView Plus Compact User Manual User Manual
Page 71

Publication 2711PC-UM001A-EN-P - March 2009
71
Configuring the Terminal Chapter 4
Modifying Regional
Settings
You can adjust regional settings for a specific language installed on
the terminal, including the date, time and numeric formats.
To access regional settings for a language, select Terminal
Settings>Time/Date/Regional Settings>Regional Settings. The current
language appears at the bottom of the Regional Settings screen.
Select a Language
You can select a language that is installed on the terminal. Languages
are installed as a part of the operating system.
1. Select Terminal Settings>Time/Date/Regional Settings>Regional
Settings>Language.
2. Select a language by pressing the up and down cursor keys.
3. Press OK.
The selected language appears at the bottom of the Regional
Settings screen.
Change the Decimal Separator for Numeric Formats
You can change the decimal separator used in numerics for the
current language. The default decimal separator is a period.
1. Select Terminal Settings>Time/Date/Regional Settings>Regional
Settings>Numeric Format.
The field shows the default decimal separator. The field accepts
three characters.
2. Enter up to three characters for the new separator.
3. Click OK.