Rockwell Automation 2727-M7P20D1P1, -M7P20D1Q2,-M7P20D1Q3 MobileView Machine Terminal MT750 - Manual (Page 56)

Publication 2727-UM003D-EN-P
4-8 Using RSView ME Station
Running an Application To run a loaded application, select the Run Application button on
the main RSView ME Station screen. An application must be loaded,
before you can run it. Log files generated by the application may be
deleted if this option was selected on the main screen or enabled as a
Startup Option under Terminal Settings.
Application Settings From the Application Settings screen, you can show device shortcuts
defined for the loaded .MER application. For example, your .MER
application might have SLC defined as a device shortcut name for the
SLC 5/05. Device shortcuts are read-only and cannot be edited.
Terminal Settings From Terminal Settings, you can open screens to configure and
modify non-application settings for the MobileView terminal.
Moves highlight up
Moves highlight down
Selects highlighted
item and opens screen
• On a touch terminal, tap the
button.
• On a keypad terminal, press
the corresponding key on the
keypad
Returns to previous
screen.
Networks and Communications
Terminal Setting Description
About RSView ME Station Describes the RSView ME Station software installed on
the 2727-M7P20D1Q2, 2727-M7P20D1Q3 terminals.
Diagnostics Setup Forwards diagnostic messages form a remote log
destination to a computer running diagnostics.
File Management Copies or deletes application files or font files from a
storage location.
Font Linking Links a font file to a base font loaded on the terminal.
Networks and Communications Configures network connections and communication
settings specific to the application.
Print Setup Configures settings for printing displays, alarm messages,
and diagnostics messages generated by the application.
RSView ME Station Startup Specifies whether the terminal starts up in configure or
run mode. Also lets you enable/disable tests to run on the
terminal at startup.
Time/Date Sets the date, time.