Rockwell Automation 1794-AENTR_AENTRXT FLEX I/O Dual Port EtherNet/IP Adapter Modules - Manual (Page 79)

Publication 1794-UM066A-EN-P - February 2012
Adapter Web Dialogs 71
The Network Configuration page opens.
From the Network Configuration page, complete these entries, noting that values
for Network Interface are disabled when DHCP is Dynamic DHCP and port
speed and duplex mode are disabled when Autonegotiate Speed and Duplex is
selected.
• For Initial Network Configuration:
– Ethernet Interface Configuration
- Static
- Dynamic DHCP
• For Network Interface, fill out these fields:
– IP Address
– Subnet Mask
– Gateway Address
– Primary Name Server