Rockwell Automation 2711P-RDT12H High-bright Display Module - Manual

Installation Instructions
High-bright Display Modules
Catalog Number 2711P-RDT12H
About the Module
This document provides instructions on how to install the PanelView Plus or
PanelView Plus CE high-bright display module in a panel or enclosure.
Refer to the installation instructions shipped with the logic module and
communication module for field installation of these components.
For complete information on installing, wiring, and troubleshooting the terminals,
refer to the publications listed under
Additional Resources .
Topic Page
Important User Information 2
Environment and Enclosure 3
Outdoor Installation 4
Hazardous Locations 5
Environnements dangereux 6
Wiring and Safety Guidelines 9
About the Terminals 10
Install the Terminal 11
Logic Module Compatibility 15
External Power Supply For Nonisolated DC Terminals 16
External Power for Isolated DC Terminals 16
Remove and Install the Power Terminal Block 18
DC Power Connections 19
Troubleshooting 21
Ethernet Cable 21
Additional Resources 27