Rockwell Automation 1792D-12BT4PE ArmorBlock MaXum 12 In/4 Out Module with Ground Lug - Manual (Page 16)

16 ArmorBlock MaXum 12 Input/ 4 Output Module With Ground Lug
Publication 1792D-IN056A-EN-P - October 2004
Output Specifications (cont.) Maximum Minimum
Surge Current - for 10ms, repeatable
every 2s 4.0A -
No Load Sense Current (On-state) 0.18A -
General Specifications Maximum Minimum
DeviceNet Power Voltage
Current
Refer to the graphs in the DeviceNet
Power Supply Requirements section of
the ArmorBlock MaXum I/O and
ArmorBlock I/O Selection Guide, pub.
no. 1792-SG001.
25V dc max
175mA max (no sensors) 11V dc min
up to 1.6A (12 sensors @
50mA per sensor)
Auxiliary Power Voltage
Current
30V dc max
4A max 10V dc min
4A max
Indicators Net/Mod Status - red/green
Logic Status - green
Auxiliary Power - green
Point LED - yellow/orange/red
Communication Rate • 125Kbps @ 500 meters(1600 feet) for thick cable, flat
media length 375 meters (1230 feet)
• 250Kbps @ 200 meters(600 feet) for thick cable, flat
media length 150 meters (492 feet)
• 500Kbps @ 100 meters (330 feet) for thick cable, flat
media length 75 meters (246 feet)
Dimensions (assembled to base)
inches - (Millimeters) 1.9H x 2.7W x 6.9D
(48)H x (69)W x (174)D
Operational Temperature IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock):
-25 to 60 ° (-13 to 140 ° F)
Storage Temperature IEC 60068-2-1 (Test Ab, Un-packaged Non-operating Cold),
IEC 60068-2-2 (Test Bb, Un-packaged Non-operating Dry
Heat),
IEC 60068-2-14 (Test Na, Un-packaged Non-operating
Thermal Shock):
-25 to 80 ° C (-13 to 176 ° F)
Relative Humidity IEC 60068-2-30 (Test Db, Un-packaged Non-operating Damp
Heat):
5 to 100% non-condensing
Vibration IEC 60068-2-6 (Test Fc, Operating):
10g @ 10-500 Hz
Operating Shock IEC 60068-2-27 (Test Ea, Unpackaged Shock):
30g
Non-Operating Shock IEC 60068-2-27 (Test Ea, Unpackaged Shock):
50g
12 Input / 4 Output Module - Cat. No. 1792D-12BT4PE