Rockwell Automation 1786-TPST2T ControlNet IP67 Tap and Cable Assembly Kit Installation Instructions - Manual (Page 3)

ControlNet IP67 Tap and Cable Assembly Kit Installation Instructions 3
Publication 1786-IN017B-EN-P - May 2004
The kit also includes other items, such as a DIN rail mounting bracket and screws. See Table
1 below for a complete listing of the kit’s contents.
Table 1 ControlNet IP67 Tap and Cable Assembly Kit Contents
Catalog/
Publication
Number
Description Qty.
1786-TPIP67 IP67 Tap Body (not sold separately) 1
One of the following 1-meter drop cables, depending on the version of
the kit you order (not sold separately): 1
1786-TPSDT2B TNC to Straight BNC Drop Cable
1786-TPRDT2T TNC to Right-angle TNC Drop Cable
1786-TPSDT2T TNC to Straight TNC Drop Cable
1786-TNCL10 TNC Plugs (bagged) 2
1799-BRKD DIN Rail Mounting Bracket 1
DIN Rail Mounting Screws, #4-40 x .375
Pan Head, Cross Recess, Stainless Steel
2
Gray dust cap (for the drop cable) 1
1786-IN017B-EN-P ControlNet IP67 Tap and Cable Assembly Kit Installation Instructions 1
Important User Information
Solid state equipment has operational characteristics differing from those of electromechanical equipment.
Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (Publication
SGI-1.1 available from your local Rockwell Automation sales office or online at
http://www.ab.com/manuals/gi) describes some important differences between solid state equipment and
hard-wired electromechanical devices. Because of this difference, and also because of the wide variety of
uses for solid state equipment, all persons responsible for applying this equipment must satisfy themselves
that each intended application of this equipment is acceptable.
In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages
resulting from the use or application of this equipment.
The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many
variables and requirements associated with any particular installation, Rockwell Automation, Inc. cannot
assume responsibility or liability for actual use based on the examples and diagrams.
No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits,
equipment, or software described in this manual.
Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell
Automation, Inc. is prohibited.
Throughout this manual we use notes to make you aware of safety considerations.