Connect controlnet segments in a network topology – Rockwell Automation 1786-TPST2T ControlNet IP67 Tap and Cable Assembly Kit Installation Instructions User Manual
Page 14

14 ControlNet IP67 Tap and Cable Assembly Kit Installation Instructions
Publication 1786-IN017B-EN-P - May 2004
Connect ControlNet Segments in a Network Topology
See the following illustration for a sample network topology installation.
1 Although the arrow in this illustration points to the tap body, the catalog number called out corresponds to the appropriate
ControlNet Tap and Cable Assembly Kit.
TIP
Except where indicated in the illustration above, use only the
hardware that we provide with the connector. Other hardware can
diminish the integrity of your connection. For catalog numbers shown
in the illustration above but not supplied in the kit, contact your local
Rockwell Automation distributor.
31290-M
1786-BNC2TNC
1786-TNCJI4
TNC to BNC
drop cable
Wire Gland
(not supplied by
Rockwell Automation)
1786-TNCLP4
1786-TNCLXTL4
TNC to BNC
drop cable
1786-TCT2BD1
1
1786-BNC2TNC
1786-TPS
1786-TNCL10
1786-BNC/B
1786-TNCLP4
1786-BNC/B
1786-RG6
IP67-compliant
ControlNet device
1786-BNC/B
TNC to BNC
drop cable
TNC to BNC
drop cable
1786-RG6
1786-TPST2T,
-TPRT2T
1
1786-TNCL10
1786-RG6
1786-RG6
1786-TCT2BD1
1
1786-TCT2BD1
1
1786-TNCL10
1786-TNCL10
1786-BNC/B