Ring statistics, Crash display, Heap statistics – Rockwell Automation 1788-EN2DNR EtherNet/IP to DeviceNet Linking Device User Manual User Manual
Page 45: Crash display heap statistics, Diagnostic web pages— miscellaneous
Rockwell Automation Publication 1788-UM059A-EN-P - August 2014
45
Diagnostic Web Pages
Chapter 6
Media Counters Port 1/Port 2
Ring Statistics
This section contains information about the topology of the network, and
specific ring information.
Diagnostic Web Pages—
Miscellaneous
The following sections explain the miscellaneous sections of the diagnostic web
pages.
Crash Display
This is the hexadecimal dump of the current fatal event log, that is stored in the
linking device. If no crash has ever occurred, the contents are all zero.
Heap Statistics
This information is only for support issues.
Field
Description
Alignment Errors
A frame containing bits that do not total an integral multiple of eight.
FCS Errors
A frame containing eight bits, at least one of which has been corrupted.
Single Collisions
The number of outgoing packets that encountered only one collision during
transmission.
Multiple Collisions
The number of outgoing packets that encountered 2...15 collisions during
transmission.
Excessive Collisions
The number of frames that experience 16 consecutive collisions.
MAC Transmit Errors
Frames for which transmission fails due to an internal MAC sublayer transmit error.
Frame Too Long
The number of incoming packets that exceed the maximum Ethernet packet size.
MAC Receive Errors
Frames for which reception on the Ethernet interface failed due to an internal MAC
sublayer receive error.