Rockwell Automation 1762-OX6I MicroLogix 1200 Relay Output Module - Manual (Page 6)

6 MicroLogix 1200 Isolated Relay Output Module
Publication 1762-IN017C-EN-P - May 2013
Use DIN rail end anchors (Allen-Bradley part number 1492-EA35 or 1492-EAH35) for
environments with vibration or shock concerns.
Panel Mounting
Use the dimensional template shown below to mount the module. The preferred mounting
method is to use two M4 or #8 panhead screws per module. M3.5 or #6 panhead screws may
also be used, but a washer may be needed to ensure a good ground contact. Mounting screws
are required on every module.
TIP
For environments with extreme vibration and shock concerns, use the
panel mounting method described below, instead of DIN rail mounting.
End Anchor
End Anchor
90
(3.54) 100
(3.94)
40.4
(1.59)
40.4
(1.59)
14.5
(0.57)
For more than 2 modules: (number of modules - 1) x 40.4 mm (1.59 in.)
NOTE:
Hole spacing tolerance:
±0.4 mm (0.016 in.).
Mi
cr
oL
og
ix
12
00
Ex
pa
ns
io
n I
/O
Mi
cr
oL
og
ix
12
00
Ex
pa
ns
io
n I
/O
Mi
cr
oL
og
ix
12
00
Ex
pa
ns
io
n I
/O
Mi
cr
oL
og
ix
12
00