Rockwell Automation 1757-PIM ProcessLogix Pulse Input Module Installation - Manual (Page 13)

ProcessLogix Pulse Input Module 13
Publication 1757-IN900A-US-P - February 2000
European Communities (EC) Directive Compliance
If this product has the CE mark it is approved for installation within the European
Union and EEA regions. It has been designed and tested to meet the following
directives.
EMC Directive
This product is tested to meet the Council Directive 89/336/EC Electromagnetic
Compatibility (EMC) by applying the following standards, in whole or in part,
documented in a technical construction file:
•
EN 50081-2 EMC — Generic Emission Standard, Part 2 — Industrial
Environment
•
EN 50082-2 EMC — Generic Immunity Standard, Part 2 — Industrial
Environment
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low Voltage, by
applying the safety requirements of EN 61131-2 Programmable Controllers, Part 2 -
Equipment Requirements and Tests. For specific information required by EN
61131-2, see the appropriate sections in this publication, as well as the
Allen-Bradley publication Industrial Automation Wiring and Grounding Guidelines
For Noise Immunity, publication 1770-4.1.
This equipment is classified as open equipment and must be mounted in an
enclosure during operation to provide safety protection.
Parameter Specification
Certifications:
FM, CSA
Unclassified Areas
FM Class 1, Div. 2
C-tick
Yes
Mounting and interfacing
Mounting – maintenance requires a hot work permit
Yes
(1)
A value of 70°C (158°F) is the maximum “component ambient” temperature when the air temperature below
the chassis is 0° to 60°C (32 to 140°F).