beautypg.com

Or 1 2 3 – Rockwell Automation 1785-L20C_L40C QUICK START CONTROLNET PLC-5 User Manual

Page 16

background image

2–4

Set Up the Hardware

Publication 1785-10.7 – October 1997

Install the Power Supply

20619–M

Set the jumpers on
the back side of the
power supply like this:

Connect the power cord to the 120V ac
connector of the power supply module.

Install the power supply in the chassis
and snap the module-locking bar over
the modules.

This side plugs into connector on the module.

insert wire
here

place tool here

insert wire
here

place tool here

or

1

2

3

locking bar

For more information, see the Power Supply Modules
(1771-P4S, -P6S, -P4S1, -P6S1) Installation Instructions, publication
number 1771-2.135.

More

See also other documents in the category Rockwell Automation Equipment: