Rockwell Automation 1785-ENET PLC-5 Ethernet Interface Module Installation Instructions - Manual (Page 36)

36 PLC-5 Ethernet Interface Module
Publication 1785-IN019B-EN-P - January 2007
• %format - legal values are %d for decimal and %x for hexadecimal. The following
file types allow the format to be specified:
• Display format defaults - Input and Output file elements are output in octal format.
Status and BCD file elements are output in hexadecimal format with a leading 0x.
Integer file elements are output in decimal format. Complex data types (Timer,
Counter, MSG, BT, Control, PID, and SCF) are output as a table with bits and
important words specified.
• Fixed display formats - float files are always output in floating-point format
(“C”%g format). ASCII and string files are always output as a null-terminated text
string. Binary files are always output as two binary bytes.
HTML Examples
The following examples show an HTML code segment in bold with a short description of
what you would see on a Web browser:
The input image word is I:0 is .
This segment displays the value of the first word of the input image table in the
default format of octal with bold type.
The time values in T4:0 are.
This segment will display the values of the timer in T4:0 in the default format of a
table.
I:0 is <,b>.
This segment displays the value of the first word of the input image table in decimal
with bold type.
T4:0 is .
This segment displays the values of the three words comprising timer T4:0 in decimal
with bold type.
N24:0 to n24:3 are .
This segment displays the values of the four words in N24:0 through N24:3 in
decimal with bold type.
S:21-S:23 are .
This segment displays the values of the three words in S:21 through S:23 in decimal
with bold type.
• Input • Integer • MSG • BCD
• Output • Timer • BT • PID
• Status • Counter • Control • SFC