Rockwell Automation 1785-ENET PLC-5 Ethernet Interface Module Installation Instructions - Manual (Page 13)

PLC-5 Ethernet Interface Module 13
Publication 1785-IN019B-EN-P - January 2007
Web Diagnostics and Module Information
This enhancement is a user-friendly tabularized view of Web diagnostics and module
information.
Web User-provided Pages (WUPP)
WUPP lets you create your own custom Web pages to provide executive summaries of
process information. The Web pages can contain data table elements, text, and images. These
pages are accessible to any Internet user who has network access to the PLC-5 controller.
Web Custom-data Monitor (WCDM)
WCDM is a specialized WUPP that creates a Web page to view these elements in table form.
Internet Scanner Test
Using the Internet Scanner, version 6.21.2001.320, the module passes network-vulnerability
tests with the exception of Simple Network Management Protocol (SNMP). While the PLC-5
controller has default SNMP passwords, the controller SNMP information is read-only. If you
prefer to limit access to SNMP information, we recommend you configure your network to
filter out SNMP requests. For more information, contact Rockwell Automation Technical
Support at 440.646.3223.
TCP/IP
The module’s TCP/IP communications have been updated for enhanced UDP message
support and super-netting
SLC 5/05 Messaging
The module supports SLC Typed Read and Write MSG instructions through the Ethernet
interface module to SLC 5/05 controllers
Additional Ethernet-channel Diagnostics
The module includes additional Ethernet-channel diagnostics when using the module with
any of the following series/revisions of PLC-5 controllers:
• Series E, Revision E or later
• Series D, Revision F.1 or later
• Series C, Revision P.1 or later
• Series B, Revision P.1 or later