beautypg.com

Rockwell Automation 1784-PM16SE 16 Axis PCI SERCOS interface Card Installation Instructions User Manual

Page 25

background image

16 Axis PCI SERCOS interface Card 25

Publication 1784-IN041A-EN-P – June 2003

The Communication Phase LED

The Communication Phase (CP) LED provides information as to what
phase the SERCOS link is in.

SERCOS Communication Phase Status Using the CP Indicator

1784-PM16SE Card Specifications

If the CP LED displays:

Then the card status is:

Solid Orange

In Phase -1: Autobaud detection in progress.

Off

In Phase 0: looking for a closed ring.

Flashing Red

In Phase 1: looking for active nodes.

Alternating Red/Green

In Phase 2: configuring nodes for
communication.

Flashing Green

In Phase 3: configuring device specific
parameters

Solid Green

In Phase 4: configured and active.

Number of Nodes

16 axes maximum

Card location

32 bit 33MHz primary PCI Bus slot

Card keying

3.3 / 5 VDC universal

Power Dissipation

7.5 W maximum

Backplane Current

5 VDC @ 1.065 A and 3.3 VDC @ 0.050 A

1

Environmental Specifications

Slot Temperature
Storage temperature
Relative Humidity

0-60

° C (32-140° F)

-40 to 85ºC (-40 to 185ºF)
30 to 95% non condensing IEC 68-2-30

Shock

Operating
Non-operating

30g peak acceleration, 11(

±1)ms pulse width

50g peak acceleration, 11(±1)ms pulse width

Vibration

2g @ 10-150Hz per IEC 68-2-6