Rockwell Automation 1784-PM16SE 16 Axis PCI SERCOS interface Card Installation Instructions - Manual (Page 19)

16 Axis PCI SERCOS interface Card 19
Publication 1784-IN041A-EN-P – June 2003
Fiber Optic cables made from glass are a better conduit for the light to pass
through thus increasing the length of cable that may be used and still supply
a strong enough signal for use with the 1784-PM16SE card.
The card is connected to the drive(s) via a 200
µm glass fiber optical cable.
Glass fiber optic cables have a transmission range of 1 meter to 200 meters.
The maximum bend radius is 2.5 cm. Both the transmitter and receiver
connections are made using a F-SMA standard plug that conforms to the
F-SMA screw type connector.
Premade glass fiber optic cable assemblies are available from Allen-Bradley.
Glass fiber optic cables come with a standard jacket (Polyvinyl Chloride) for
use in normal environments.
The following table shows the catalog numbers and lengths available for
premade glass fiber optic cables. These cables have a standard jacket
(Polyvinyl Chloride) for use in normal environments.
Allen-Bradley Catalog
Number Length in meters
(feet)
2090-SCVG1-0 1 m (3.28 ft)
2090-SCVG3-0 3 m (9.84 ft)
2090-SCVG5-0 5 m (16.26 ft)
2090-SCVG8-0 8 m (26.25 ft)
2090-SCVG10-0 10 m (32.81 ft)
2090-SCVG15-0 15 m (49.22 ft)
2090-SCVG20-0 20 m (65.62 ft)
2090-SCVG25-0 25 m (82.03 ft)
2090-SCVG32-0 32 m (104.99 ft)
2090-SCVG50-0 50m (164.05 ft)
2090-SCVG100-0 100m (328.1 ft)
2090-SCVG150-0 150m (492.15 ft)
2090-SCVG200-0 200m (656.2 ft)