Rockwell Automation 1756-ENET/B ControlLogix Ethernet Communication Interface Module User Manual - Manual (Page 69)

Publication 1756-UM051B-EN-P - November 2000
Analog I/O with Direct Connection 6-5
2. Select the 1756-OF8 analog output module from the list and click
on OK.
The Module Properties window will open.
3. Enter the following parameters:
You must now configure the channel settings of the Analog I/O
module. You do this using a series of pages that appear in the Module
Properties window.
4. Click on the Next button. The following page will open:
Name Remote_Analog_Output
Slot 3
Comm Format
Float Data
(1)
(1) All analog Comm Formats use direct connection. The default is
floating decimal point data.
Electronic Keying
(2)
(2) See Appendix F for important information about Electronic Keying.
Compatible Module