Rockwell Automation 1756-ENET/B ControlLogix Ethernet Communication Interface Module User Manual - Manual (Page 58)

Publication 1756-UM051B-EN-P - November 2000
5-12 Rack Optimized I/O
9. Click on the Finish button to accept the configuration.
The I/O Configuration in the Project window should look similar to
the one shown below.
Edit the Controller Tags
When you add modules to the I/O configuration the system creates
tags for those modules to use in the application program. For our
example application we need to add another Controller Tag.
1. Double-click on the Controller Tags folder in the project window.
The Controller Tags window will open. You will see the tags
created for the 1756-ENET/B and digital I/O modules.
TIP
If you want to alter the default parameters, click on
the Next button. Refer to the ControlLogix Digital
I/O User Manual, publication 1756-6.5.8, for details.
Enter the new tag here
Tags created
by the system