Rockwell Automation 1756-ENET/B ControlLogix Ethernet Communication Interface Module User Manual - Manual (Page 118)

Publication 1756-UM051B-EN-P - November 2000
2 Index
installing the ethernet module 2-1 to 2-8
applying chassis power 2-7
checking power supply and module status 2-8
connecting to the ethernet network 2-6
determining module slot location 2-3
inserting module in the chassis 2-4
insertion and removal under power 2-2
preparing the chassis 2-2
removing or replacing the module 2-5
wiring the ethernet connector 2-6
IP address 3-3 to 3-4
L
ladder program 5-14 to 5-15, 6-10 to 6-11, 7-6 to 7-7
LED status indicators A-1
M
module features 1-1
P
produced and consumed tags 7-1 to 7-19
create consumer application 7-8 to 7-18
add producer to consumer’s I/O configuration 7-9 to
7-14
create consumer controller 7-8
create consumer tags 7-15 to 7-17
download configuration to consumer 7-18
create producer application 7-3 to 7-7
create producer ladder program 7-6
create producer tags 7-4 to 7-5
download producer application program 7-7
set up the hardware 7-2
test the messaging 7-19
produced tags 1-4
producer/consumer model 1-4
R
rack optimized and direct connections 1-2 to 1-3
mixing rack optimized and direct connections 1-3
rack optimized I/O 5-1 to 5-17
add local ENET module to I/O configuration 5-4 to 5-5
add remote ENET module to I/O configuration 5-6 to 5-8
add remote I/O modules to I/O configuration 5-8 to
5-12
create example application 5-3 to 5-15
create ladder program 5-14
download program to controller 5-15
edit controller tags 5-12 to 5-13
set up the hardware 5-2
test example application 5-16 to 5-17
related publications P-5
requested packet interval (RPI) 1-5
Rockwell BootP utility 4-1
RSLinx
using to configure the Ethernet module 4-2 to 4-4
RSLinx communication drivers C-1 to C-4
AB_ETH driver C-2 to C-4
installing the software C-1
S
simple network management protocol (SNMP) 3-2
status indicators A-1
subnet mask 3-5
T
TCP/IP (transmission control protocol/internet
protocol) 3-1
terminology P-6 to P-8
U
UDP (user datagram protocol) 3-2
W
web pages B-1 to B-5
chassis who B-5
diagnostic information B-3 to B-4
module information B-2
TCP/IP configuration B-2
what the module does 1-2
who should use this manual P-1