Rockwell Automation 1753-OB16 GuardPLC Digital Output Module Installation Instructions - Manual (Page 11)

GuardPLC Digital Output Module 11
Rockwell Automation Publication 1753-IN005B-EN-P - June 2010
Specifications
Technical Specifications – 1753-OB16 Module
Attribute 1753-OB16
Interfaces: GuardPLC
Ethernet 2 x RJ45, 10/100Base T (with 100 Mbit/s) with integrated switch
Operating voltage 24V DC, -15…20%, w
ss
15% from a power supply with protective separation,
conforming to IEC 61131-2 requirements
Isolation voltage 50V (continuous), Basic Insulation Type, I/O to Ethernet and Ethernet to DC power
Wiring category (1) Category 2 on communication ports, signal ports, and power ports
Wire size • I/O – 0.13…1.3 mm 2 (26…16 AWG) solid or stranded copper wire rated at
75 °C (167 °F) or greater with 1.2 mm (3/64 in.) insulation max
• Power – 0.33…2.1 mm 2 (22…14 AWG) solid or stranded copper wire rated at
75 °C (167 °F) or greater with 1.2 mm (3/64 in.) insulation max
• Ethernet – RJ45 connector according to IEC 60603-7, 2 or 4-pair Category 5e
minimum cable according to TIA 568-B.1, or Category 5 cable according to
ISO/IEC 24702
Wire type Shielded on Ethernet
Terminal block torque 0.51 N•m (4.5 lb•in)
Fuse (external) 24V DC power: 10 A (time-lag)
Pilot Duty Rating Not rated
Response time ≥ 10 ms
Battery backup None
Current consumption Approximately 0.2 A per group @ 24V
Enclosure Type Rating Meets IP20
Width, approx. 207 mm (8.16 in.) including housing screws
Height, approx. 114 mm (4.49 in.) including latch
Depth, approx. 66 mm (2.60 in.) including grounding bolt
Weight, approx. 0.85 kg (1.87 lb)
Digital Outputs
Number of outputs 16 (not electrically isolated)
Output voltage range ≥ L+ minus 2V
Output current 1 A max @ 60 ° C (140 ° F), 2 A max @ 40 ° C (104 ° F)
Surge current per
channel 4 A for 10 ms @ 1Hz
Current load, min 2 mA per channel