Rockwell Automation 1785-Lx6B,D17856.5.13 MNL. PLC-5 PROTECTED PROCESSOR - Manual (Page 16)

Chapter 2
Configuring Passwords and Privileges
2-6
A default privilege class determines the class of a particular channel
and of all stations/nodes attached through that channel. If you have a
specific node that requires privileges other than those that the channel’s
class assignment allows, you can specify the privilege class for that node
separately (see page 2-8).
Communication channels and offline files start out with class-1 privileges.
Assign a new default privilege class for a communication channel or offline
file by following the steps on the left.
Channel Privileges
Default Privilege Class
Priv. Class Class 1 Class 2 Class 3 Class 4
Channel 0: SYSTEM (P–2–P) CLASS 1 RW RW RW RW
Channel 1A: DH+ CLASS 1 RW RW RW RW
Channel 1B: SCANNER MODE CLASS 1 RW RW RW RW
Channel 2A: UNUSED CLASS 1 RW RW RW RW
Channel 2B: UNUSED CLASS 1 RW RW RW RW
Channel 3A: N/A CLASS 1
Offline: CLASS 3
Press a function key or enter a value.
>
Rem Prog Forces:None 5/46 File PROTECT
Node Select
Priv Priv
F3 F10
Important: If you are using DTEP, assign defaults to all channels—
including any currently unused channels.
Channel
Overview
Select (Toggle)
Privileges
Channel
Privileges
Cursor to Intersection
of Channel and Default
Privilege Class
6200
Main Menu
General
Utility
F3
Online
Program
Offline
Program
F1
F7
or
F4
F2
F10
Assigning Default Privilege
Classes to Communication
Channels and Offline Files