Rockwell Automation 1785-Lx6B,D17856.5.13 MNL. PLC-5 PROTECTED PROCESSOR - Manual (Page 15)

Chapter 2
Configuring Passwords and Privileges
2-5
If you want a class to have the ability to: Enable this privilege/operation:
Enable/Disable privileges for each class
Important: If you are using DTEP, disable this privilege for
every class except class 1 (system administrator). Modify Privileges
①
Create or delete data-table files Data Table File Create/Delete
Create or delete program files Program File Create/Delete
Restore a processor memory file using a logical address
In general, this should be paired with a Physical Write Logical Write
①
Restore a processor memory file with a physical address
In general, this should be paired with a Logical Write Physical Write
Read from the processor using a logical address
In general, this should be paired with a Physical Read
Important: Without this, a user cannot even see the program
directory; required for all but Physical Read.
Logical Read
①
Read the processor’s memory with a physical address
In general, this should be paired with a Logical Read. Physical Read
Change processor mode when the keyswitch on the processor
is set to REMOTE Mode Change
Enable or disable forces in the system; clear all I/O forces I/O Force
Enable or disable SFC forces; force individual transitions on or
off; or clear all SFC forces SFC Force
Clear the processor memory Clear Memory
Restore or merge a processor memory file Restore
Edit a program file in any processor mode Online Editing
① Important: You cannot delete this privilege from class 1 (system administrator).