Rockwell Automation 1785-KA5P/B DHP COMM. ADAPATER MOD. - Manual (Page 13)

Installing the 1785ĆKA5
Communication Adapter Module
Chapter 2
2-2
The 1785-KA5 module has three banks of DIP switches that let you select
various communication options. The switch assemblies and their
corresponding options are:
To set the Use switch assembly
DH485 station address and baud rate SWĆ1
DH+ station address and the auto route enable option SWĆ2
DH485 and DH+ channel LINK_IDs SWĆ3
Figure 2.1 shows the location of the switches on the 1785-KA5 module.
Figure 2.1
1785ĆKA5 communication adapter module switch assemblies (cat. no.
1785ĆKA5/B shown)
B7
B6
B5
B4
B3
B2
B1
B0
B3
B2
B1
B0
B3
B2
B1
B0
B4
B3
B2
B1
B0
SW-1 SW-2 SW-3
ON
OFF
ON (1)
switch assemblies 19191
DH485 BAUD RATE
DH485 STATION ADDRESS
DH+ STATION ADDRESS
DH485 CHANNEL DH+ IP LINK ID
DH+ CHANNEL LINK ID
RESERVED
AUTO ROUTE ENABLE
OFF (0)
LEGEND
Important: The 1785-KA5 uses the following convention:
on = binary 1
off = binary 0
Setting the Switches