Rockwell Automation 1762-IF2OF2 MicroLogix Analog Input/Output Module - Manual (Page 21)

MicroLogix 1762-IF2OF2 Analog Input/Output Module 21
Publication 1762-IN005C-EN-P - July 2013
Specifications
General Specifications
Attribute Value
Dimensions, HxWxD 90 x 40.4 x 87 mm (3.54 x 1.59 x 3.43 in.)
Height including mounting tabs is 110 mm (4.33 in)
Approximate Shipping Weight
(with carton) 240g (0.53 lbs.)
Bus Current Draw (max.) 40 mA @ 5V DC
105 mA @ 24V DC
Analog Normal Operating Range Voltage: 0…10V DC
Current: 4…20 mA
Full Scale
(1)
Analog Ranges
(1) The over- or under-range flag comes on when the normal operating range (over/under) is exceeded. The module continues to
convert the analog input up to the maximum full scale range.
Voltage: 0…10.5V DC
Current: 0…21 mA
Resolution 12 bits (unipolar)
Repeatability (2)
(2) Repeatability is the ability of the input module to register the same reading in successive measurements for the same input
signal.
±0.12%
Input and Output Group to System
Isolation 30V AC/30V DC rated working voltage (3)
(IEC Class 2 reinforced insulation)
type test: 500V AC or 707V DC for 1 minute
(3) Rated working voltage is the maximum continuous voltage that can be applied at the terminals with respect to earth
ground.
Module Power LED On: indicates power is applied.
Vendor ID Code 1
Product Type Code 10
Product Code 75
Recommended Cable Belden 8761 (shielded)
Wire size See Wire Size and Terminal Screw Torque on page 16
Wiring category (4)
(4) Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and
Grounding Guidelines, publication
1770-4.1 .
2 - on signal ports