About this publication, Terms and conventions – Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 Master Module Installation Instructions User Manual
Page 3

Powermonitor 3000 Master Module 3
Publication 1404-IN007F-EN-P - November 2009
About This Publication
Except as noted, refer to the Powermonitor 3000 User Manual, publication
detailed information on the topics in this list. These installation instructions do not contain
the following information:
• Information on metering functionality and measurements
• Use of the display module for configuration, monitoring, and commands
• Discussion of communication options, functionality, configuration, and operation
• Setpoint configuration and operation
• Discrete I/O configuration and operation
• Data logging including Event Log, Trend Log, Min/Max Log, and Load Factor Log
• Advanced features including Oscillography, Harmonic Analysis, and Transient
Detection
• Powermonitor 3000 data tables
• Sample ladder diagrams for communicating with the Powermonitor 3000 unit by
using various communication options
• Display Module Installation Instructions, see publication
This manual does not provide information on functionality found in the Powermonitor 3000
master module, firmware revision 3.0 and earlier, or Ethernet series A, all firmware revisions,
or Ethernet series B, firmware revision 2.0 earlier. Refer to publication
and
.
Terms and Conventions
The following terms and conventions are used in this manual.
Terms and Conventions
Abbreviation
Term
AWG
American Wire Gauge
CSA
Canadian Standards Association
CT
Current transformer
DM
Display module
EMI
Electromagnetic interference
ID
Identification
IEC
International Electrotechnical Commission
NEMA
National Electrical Manufacturers Association
PLC
Programmable logic controller